MATERIALS: Support
—

PLA MCPP

PLA Flashforge

PLA N Filkemp

TPU MCPP

Nylon Filkemp

Nylon BEESupply

PETG Filkemp

PETG BEESupply

PVA MCPP

Properties

Density (g/ml): 1.20±0.05g/cm3
Melt Flow Rate: 19~21g/10min (300ºC, 1.2 Kg)
Tensile Strength (MPa): ≥50MPa
Flexural Modulus (MPa): ≥2200MPa
Notched impact strength: ≥70KJ/m (ASTM D356)
Elongation @ break(%): ≥50.0%
Heat deformation temperature: ≥125ªC
Diameter: ±0.05mm
Roundness Deviance: ≤0.08mm

Recommendation

Filament Diameter: 1.75mm
Printing Temperature: 240-260ºC
Printing Speed: 60~90mm/s
Printing Layer Height: 0.1~0.2mm
Platform Temperature: 100~120ªC
Raft: Necessary

Properties

Density (g/ml): 1.09±0.01g/cm3
Melt Flow Rate: 3~4g/10min
Tensile Strength (MPa): ≥45MPa
Bending Strength: ≥65MPa
Flexural Modulus (MPa): ≥2200MPa
Notched impact strength: ≥14KJ/m (ISO179)
Heat deformation temperature: ≥80ªC
Diameter: ±0.05mm
Roundness Deviance: ≤0.05mm

Recommendation

Filament Diameter: 1.75mm
Printing Temperature: 240-260ºC
Printing Speed: 40~60mm/s
Printing Layer Height: 0.1~0.2mm
Platform Temperature: 100~110ªC
Raft: Unnecessary

Properties

Density (g/ml): 1.13 ~ 1.24
Viscosity (cps, 25℃): 160 ~ 220
Hardness (D): 84 D
Tensile Strength (MPa): 32 Mpa
Elongation @ break(%): 8%
Flexural Modulus (MPa): 2200 Mpa
Flexural Strength (MPa): 58 Mpa

Recommendation

  • Shake evenly before use
  • Put on gloves while using photopolymer resin to avoid direct contact with hands
  • Avoid direct skin contact
  • Wash with water after touching the resin
  • Avoid lighting
  • Unused photopolymer resin needs to be stores in a dark, dry and cool place