Axis Calibration?

The versatility of an entry-level 3D printer, engineered to last.
By BEEVERYCREATIVE and Hello 3D Printing World
Post Reply
Xanaden
Posts: 1
Joined: 10 Jul 2017, 15:29

Axis Calibration?

Post by Xanaden » 14 Jul 2017, 23:53

Hello Ther.
Iam Very new to 3d Printers but read Alot thats why is just bought the Hellobee, assembling worked good Bed leveling worked Okay.

My First Print was quite good but it wasnt in the middel of the Bed as it should be (in Cura it is in the Bissel ofcurse).

Do i need to Calibrate the Axis? i did All the Steps from the Youtube Channel and from the Manuel in neither of them is a Calibration of the Axis needed.


Sorry for my bad English
Alexander

MrDoom
Posts: 223
Joined: 01 Apr 2017, 10:01

Re: Axis Calibration?

Post by MrDoom » 18 Jul 2017, 11:12

Hello,

what do you mean by " it is in the Bissel ofcurse" ?

Make sure you have set the correct bed dimensions in cura otherwise it will center the object incorrectly, follow the latest user manual that is available at https://beeverycreative.com/manuals-tutorials/

HALFORD
Posts: 128
Joined: 26 Aug 2015, 12:19
Location: MANSFIELD, ENGLAND

Re: Axis Calibration?

Post by HALFORD » 21 Jul 2017, 21:57

You should read ALL the info here BEFORE diving in to print. This WILL save time and frustration later.

viewtopic.php?f=8&t=373

Happy prints....

Halford

Post Reply