Search found 17 matches

by finas
13 Jan 2020, 12:56
Forum: B2X300
Topic: learn XY travel position without going trough the seft test wizzard
Replies: 0
Views: 735

learn XY travel position without going trough the seft test wizzard

Is there a way to recalibrate the XY axel travel other than via the seft test wizzard?
by finas
13 Jan 2020, 12:53
Forum: B2X300
Topic: Profiles for printing with PC
Replies: 2
Views: 1093

Profiles for printing with PC

Can you please share some profiles for printing with PC that I can use as a starting point for tweaking? I am currently trying to print Polymaker PC MAX with quite bad results. I tried using the supplied PLA-N profile,disabling fan, increasing temp to 250 degrees and bed temp to 110, and the results...
by finas
13 Jan 2020, 12:42
Forum: B2X300
Topic: Max bed temp reached error
Replies: 0
Views: 705

Max bed temp reached error

While the printers specs point to being capable of printing with a bed temp of 130 degrees, I tried just that and the printer halts with a max temp reached error.

Can this be fixed on a future firmware version, so that the 130 degree temp can be reached and maintained?
by finas
13 Jan 2020, 12:41
Forum: B2X300
Topic: Octoprint bed visualizer question
Replies: 2
Views: 1081

Octoprint bed visualizer question

What are the commands I should configure in octoprint's bed visualizer plugin? I am currently using these: M155 S30 @BEDLEVELVISUALIZER M420 V M155 S3 Also, can I use the bed visualizer output to manually level the bed ( by adjusting the four corner screws of the bed ) so that the autolevel feature ...
by finas
12 Dec 2019, 21:29
Forum: B2X300
Topic: Firmware improvement suggestions
Replies: 2
Views: 1059

Re: Firmware improvement suggestions

Thanks for all those explanations.
by finas
08 Dec 2019, 18:16
Forum: B2X300
Topic: Firmware improvement suggestions
Replies: 2
Views: 1059

Firmware improvement suggestions

I came up with these two ideas while performing the calibration steps, specifically, the dual nozzles height calibration procedure. The dual nozzle calibration procedure is essential for both single and dual nozzle operation, mainly because if not set properly, the non-printing nozzle can collide wi...
by finas
03 Dec 2019, 15:56
Forum: B2X300
Topic: Got the printer today - help assembling -
Replies: 5
Views: 1663

Re: Got the printer today - help assembling -

updating firmware to today's release fixed the serial number issue.
by finas
02 Dec 2019, 19:57
Forum: B2X300
Topic: Got the printer today - help assembling -
Replies: 5
Views: 1663

Re: Got the printer today - help assembling -

Made a video of the issue. How frustrating.Got an open source printer and it feels like I bought DRM infused garbage. Also, for some reason the printer lights up like a Christmas tree when moving the axel's with my hand. How nice, just in time for Christmas. https://www.dropbox.com/sh/vqmfcx05lkkz9x...
by finas
02 Dec 2019, 18:31
Forum: B2X300
Topic: Got the printer today - help assembling -
Replies: 5
Views: 1663

Re: Got the printer today - help assembling -

I bite the bullet and turned on the printer and it asks for serial number that is in sticker next to extruder E1. There is no sticker next to the extruder E1, so I figured it is next to extruder E0. I double checked the assembly manual, and indeed E0 is the one on the left side, next to the sticker,...
by finas
02 Dec 2019, 17:55
Forum: B2X300
Topic: Got the printer today - help assembling -
Replies: 5
Views: 1663

Re: Got the printer today - help assembling -

humm... I inserted them on the wrong place! they sure seemed like suppositories!! Anyway, While assembling the printer I found quite a few issues with the assembly manual that ended up causing me a bit of frustration. I would suggest giving a look at the list bellow and eventually, if deemed necessa...