3DLAC – Fixation Spray for 3D Printing

3DLAC’s function is to improve the first layer adhesion in order to hold the printing steady, avoiding warping and other undesirable mistakes. It’s the perfect substitute for tape and other types of fixers due to cost-saving and its easy application.

A light 3DLAC mist over the surface is enough to hold completely the first layer to the base. Once the printed part gets cold, it can be taken off smoothly and without damages.

• Strong Fixation
• Long durability (aprox. 400 applications)
• No warping

Pulverize the hotbed keeping a distance of 20cm. Make sure the temperature of the platform is the same as the printing temperature.

When the printing is finished, wait until the platform cools down to under 30ºC, so the part can be removed carefully.