Português
Washable Resin Flashforge - 0.5L
28.00€ + VAT*
Good mechanical strength & rigid-tough balance
Low shrinkage
Excellent performance in detail
Easy clean (just using water)
Good heat-resistance with no crack or deformation (30 min at 100)
Easy painting
Good long-term storage stability
Compatible with most LCD 3D printers
Wavelength: 405nm
Volume: 500 ml
Compatible with Flashforge Foto Series & All LCD 3D Printers with 405nm
Shake evenly before use
Put on gloves while using photopolymer resin to avoid direct contact with hands
Properties
Density (g/ml): 1.13 ~ 1.24
Viscosity (cps, 25℃): 160 ~ 220
Hardness (D): 84 D
Tensile Strength (MPa): 32 Mpa
Elongation @ break(%): 8%
Flexural Modulus (MPa): 2200 Mpa
Flexural Strength (MPa): 58 Mpa
| Weight | 0.68 kg |
|---|---|
| Dimensions | 11 × 24.5 × 11 cm |
| Brand | Flashforge |
Recommendations
Shake evenly before use
Put on gloves while using photopolymer resin to avoid direct contact with hands
Avoid direct skin contact
Wash with water after touching the resin
Avoid lighting
Unused photopolymer resin needs to be stores in a dark, dry and cool place
You may also like…
3D Printers
Related products
Materials
Materials
Materials
Materials