Subscrever
×

Notícias

—

10 anos, 10 testemunhos - Estivemos à conversa com parceiros, fornecedores, clientes e antigos colegas sobre as diferentes potencialidades da impressão 3D. -

2021-05-27

10 anos, 10 testemunhos

Estivemos à conversa com parceiros, fornecedores, clientes e antigos colegas sobre as diferentes potencialidades da impressão 3D.
ESA - In the Spotlight - Impressão 3D sem limite de comprimento - Apresentada no workshop de manufatura avançada da <a href="https://www.esa.int" target="_blank">Agência Espacial Europeia</a> (ESA), esta barra em polímero de alto desempenho, com 1.5 m de comprimento, é muito maior do que a impressora 3D onde foi produzida. </br> A impressora é capaz de imprimir peças de dimensões ilimitadas numa direção. Trata-se de uma versão de demonstração terrestre da tecnologia de impressão 3D, destinada a ser usada a bordo da Estação Espacial Internacional. </br></br> O Engenheiro responsável pela área de Manufatura Avançada da ESA, Advenit Makaya, explica: “O desenvolvimento de soluções de fabricação fora da Terra para peças de grande dimensão, num contexto de exploração humana, será essencial para aumentar a sustentabilidade e a robustez de futuras missões espaciais.”</br></br> Conhecido como IMPERIAL, este projeto tem como objetivo desenvolver métodos de fabricação fora da Terra que superem as restrições de construção das impressoras 3D atuais, permitindo uma fácil construção e manutenção a bordo, aumentando a autossuficiência de futuras missões espaciais.</br></br> “Com esta atividade, superámos uma das principais limitações da impressão 3D - o volume de construção - ao usar uma impressora 3D compacta, capaz de processar termoplásticos de alto desempenho” diz Ugo Lafont o especialista em materiais da ESA. “Esta é uma grande conquista que ampliará o campo de aplicação deste processo de fabricação “on-demand”.”</br></br> O projeto está a ser realizado para a ESA através de um consórcio liderado pela <a href="https://www.ohb.de/" target="_blank">OHB</a> na Alemanha, a <a href="https://www.azimutspace.com/" target="_blank">Azimut Space</a> na Alemanha, o </a href="https://www.ait.ie/" target="_blank">Athlone Institute of Technology</a> na República da Irlanda e a <a href="https://beeverycreative.com/fundedprojects/" target="_blank">BEEVERYCREATIVE</a> em Portugal que desenvolveu a impressora 3D. </br></br> Antonella Sgambati, gestora do projeto da OHB System AG em Bremen nota que “já foi demonstrado que a fabricação de filamento fundido com polímeros de alto desempenho não é afetada pelo ambiente de microgravidade, abrindo caminho para novos desafios, como a possibilidade de imprimir peças ilimitadas numa direção ou explorar a produção em lotes. No âmbito do projeto, foram identificadas e analisadas novas lacunas tecnológicas fruto do trabalho de I&D e testes de protótipos na BEEVEREYCREATIVE, levando a esta conquista única e tornando a fabricação fora da Terra um passo mais próximo.” </br></br> É um enorme prazer inovar num grupo de trabalho (os membros do Consórcio e os responsáveis da ESA) que coopera e cria sinergias tão plenamente, afirma Aurora Baptista, CEO da BEEVERYCREATIVE.</br></br> A BEEVERYCREATIVE partilhou o video de uma impressão de teste <a href="https://www.youtube.com/watch?v=MpnoxTmbcoc" target="_blank">aqui</a>.

2021-03-12

ESA - In the Spotlight

Impressão 3D sem limite de comprimento
Revista Moldes e Plásticos 2021 - BEEVERYCREATIVE - Soluções de manufatura aditiva para cada negócio - Após o reconhecimento alcançado no primeiro projeto desenvolvido para a Agência Espacial Europeia (ESA), a BEEVERYCREATIVE integra novo consórcio para desenvolver e fabricar uma impressora 3D para a Estação Espacial Internacional, capaz de usar polímeros de engenharia e superar as limitações do volume de impressão.</br></br> Na área da medicina regenerativa e engenharia de tecidos, criou uma Bio Printer, para o I3B’s da UMinho, que permite que as células sobrevivam à impressão.

2021-02-12

Revista Moldes e Plásticos 2021

BEEVERYCREATIVE - Soluções de manufatura aditiva para cada negócio
Revista Exame - Dossier: Especial transformação digital</br> BEEVERYCREATIVE – Projetos de inovação à medida - A Beeverycreative produz e comercializa impressoras 3D e desenvolve projetos de inovação à medida das necessidades de cada cliente. “Apesar de sermos uma equipa relativamente pequena, possuímos nove anos de trabalho intenso, somos criativos e temos uma enorme capacidade de adaptação”, defende Paulo Casimiro, diretor de Marketing e Comercial da empresa. </br></br> A Beeverycreative foi pioneira no lançamento de uma impressora 3D portátil em 2013, com um design apelativo e de fácil utilização, dirigida aos segmentos semiprofissional e utilizadores domésticos. “O modelo foi distinguido com diversos prémios, que impulsionaram a internacionalização da marca e nos encorajaram a continuar a desenvolver soluções inovadoras”, salienta Paulo Casimiro, explicando que a empresa tem apostado no mercado da educação, fornecendo uma solução integrada onde, para além das impressoras 3D, cria um currículo e workshops para dotar professores e alunos de conhecimentos sobre modelação e impressão 3D.

2020-08-06

Revista Exame

Dossier: Especial transformação digital
BEEVERYCREATIVE – Projetos de inovação à medida
TCT AWARDS 2018 - Project MELT wins TCT AEROSPACE APPLICATION AWARD 2018 - Project MELT goal was to design, develop and test a fully functional ALM breadboard model (3D printer), able to work under the ISS’s (International Space Station) microgravity conditions and 3D print with engineering polymers with high end mechanical and thermal properties. It was developed by an international consortium composed by SONACA Space GmbH, BEEVERYCREATIVE (tech leader), OHB-System AG and Active Space Technologies SA. Back in May 2018, BEEVERYCREATIVE revealed that the 3D printer prototype had been delivered to its end user, the European Space Agency (ESA), and at TCT award ceremony on September 26th in Birmingham UK, the project was awarded with the TCT AEROSPACE APPLICATION AWARD 2018.

2018-09-27

TCT AWARDS 2018

Project MELT wins TCT AEROSPACE APPLICATION AWARD 2018
B2X300 - Press Release - BEEVERYCREATIVE will launch new 3D printer DIY kit, B2X300, in September 2018 - <strong style="text-align: center">BEEVERYCREATIVE will launch a new product in September 2018, new 3D printer DIY kit for the Maker Segment, B2X300. BEEVERYCREATIVE will present this product publicly at the TCT show 2018 in Birmingham, UK (25-27 September).</strong></br> BEEVERYCREATIVE is the leading 3D printer manufacturer in Portugal, prepares to launch a new product, the B2X300 DIY 3D printer kit (www.b2x300.com), for the Maker Segment. This is an important step for the company since the last product launch was in 2015, with helloBEEprusa, BEETHEFIRST+ and BEEINSCHOOL 3D printers on the market. Since 2016 that the company was working on the MELT project (www.beeverycreative.space) for the European Space Agency, and now the company is ready for releasing new products to the market. In November 2017, 2 years after the launch of their 3D printer DIY kit, helloBEEprusa, the company entered a new product development cycle for this segment. BEEVERYCREATIVE has conducted studies such as:</br> – Collecting quantitative and qualitative information data on helloBEEprusa’s user feedback with Customer Service. The idea was to gather information on doubts, problems and quality control issues;</br> – Benchmark of multiple companies in this sector, analysing what the best competitor products were and what impact they could have on the product development process and, as a result, on the launch of this new product;</br> – Market research with the help of a survey where hundreds of people from the maker segment gave very helpful feedback about their user patterns, what they value and other valuable inputs for future product development.</br>

2018-08-30

B2X300 - Press Release

BEEVERYCREATIVE will launch new 3D printer DIY kit, B2X300, in September 2018
EUROPEAN SPACE AGENCY – PROJECT “MELT” UPDATE - Consortium with a leading Portuguese 3D printing company delivers a printer prototype to ESA - The European Space Agency has received a 3D printer (ALM-Additive Layer Manufacturing breadboard machine), designed to work under microgravity and 3D print with engineering polymers with high end mechanical and thermal properties. This project was developed by an international consortium, which BEEVERYCREATIVE is a part of.</br> BEEVERYCREATIVE is the leading 3D printer manufacturer in Portugal, and in the last two years its engineers have been working on a challenging project for ESA.</br> The MELT (Manufacturing of Experimental Layer Technology) project’s goal was to design, develop and test a fully functional ALM breadboard model (3D printer), able to work under the ISS’s (International Space Station) microgravity conditions and 3D print with engineering polymers with high end mechanical and thermal properties.</br>

2018-05-15

EUROPEAN SPACE AGENCY – PROJECT “MELT” UPDATE

Consortium with a leading Portuguese 3D printing company delivers a printer prototype to ESA
i-Experience Centers 4.0 - BEEVERYCREATIVE, Siemens and CadFlow open i-Experience Centers 4.0 in Portugal. - BEEVERYCREATIVE, the leading 3D printer manufacturer in Portugal, has established a partnership with Siemens Portugal and CadFlow to open i-Experience Centers 4.0 in Portugal.</br> The i-Experience Centers 4.0 are experimentation centers created to promote Industry 4.0 projects in Portugal. These centers represent the integration of a large industrial process, from drawing to production, and will connect and promote differentiation initiatives to modernize the industry.</br> These centers will be open to companies, start-ups and universities, amongst others, and all the equipment will be accessible to anyone who wants to experiment with it. The first center has already been inaugurated on February 19th at Siemens Portugal HQ, with the presence of Minister of Economy, Manuel Caldeira Cabral, and State Secretary for Industry, Ana Teresa Lehmann.</br>

2018-03-20

i-Experience Centers 4.0

BEEVERYCREATIVE, Siemens and CadFlow open i-Experience Centers 4.0 in Portugal.
Project Imperial for ESA - BEEVERYCREATIVE is involved in another space project for the European Space Agency - <strong>International Consortium (OHB, BEEVERYCREATIVE, Sonaca Space, and Athlone – Institute of Technology in the Republic of Ireland) awarded ESA contract for the “development of a 3D printer prototype for the ISS, capable of producing large parts, using high strength and functional thermoplastics” – Project IMPERIAL </strong> Back in May 2018, project MELT: Manufacturing of Experimental Layer Technology, was successfully delivered the European Space Agency as a fully functional 3D printer prototype, able to work under the ISS’s (International Space Station) microgravity conditions and 3D print with engineering polymers with high end mechanical and thermal properties. This project was the first space project BEEVERYCREATIVE was involved in and it was developed by an international consortium which included SONACA Space, BEEVERYCREATIVE, OHB-System and Active Space Technologies. In September 2018, project MELT won the TCT Aerospace Application Award, one of the most prestigious awards in 3D Printing. (https://tctawards.com/tctawards/en/page/2018-winners)

2018-01-24

Project Imperial for ESA

BEEVERYCREATIVE is involved in another space project for the European Space Agency
Press Release: BEESOFT 4.0 – BEEVERYCREATIVE New Software - BEEVERYCREATIVE releases BEESOFT 4.0, a new software with brand new features - BEEVERYCREATIVE, the leading 3D printer manufacturer in Portugal, just released a new software, BEESOFT 4.0, to operate their 3D printers from the BEETHEFIRST and BEEINSCHOOL series.</br> As with the latest software versions, we have made a conscious effort to bring the user closer to the 3D printing world through the improvement of usability and simplicity. Relying on the precious feedback from our customers, we have developed a new software from scratch, with improved usability, simplicity and quality, allowing for future functionalities for more advanced users, like the new Printing Profile Manager, that will soon be released. The Extruder Calibration Wizard is one of the new features available, which maximizes the use of our 3D printers.</br>

2017-11-20

Press Release: BEESOFT 4.0 – BEEVERYCREATIVE New Software

BEEVERYCREATIVE releases BEESOFT 4.0, a new software with brand new features
Prémios Exame Informática - BEEVERYCREATIVE – One of the Portuguese Brands of the Year - On April 27th, we were invited to be at an event, organized by Exame Informática, one of the most important and trusted Portuguese Magazines for Tech Product news and reviews.</br> We should mention that the week before, BEEVERYCREATIVE was invited to be at an event organized by a Portuguese Government entity. There, we were surprised to be awarded with the “Empresa Gazela 2015” award, roughly translated to “Gazelle Company 2015”. This award is given to fledgling companies with high growth rates.</br>

2016-04-29

Prémios Exame Informática

BEEVERYCREATIVE – One of the Portuguese Brands of the Year
PRESS RELEASE – EUROPEAN SPACE AGENCY – PROJECT “MELT” - European Space Agency “MELT” Project</br> Consortium consisting of 4 European tech companies developing an ALM (Additive Layer Manufacturing) breadboard machine for ESA - The consortium, consisting of Active Space GmbH (Germany), Active Space SA (Portugal), OHB Systems AG (Germany) and BEEVERYCREATIVE (Portugal), won a public tender launched at the end of 2014 by the European Space Agency, and has been working on the MELT project since June last year. MELT (Manufacturing of Experimental Layer Technology) project’s goal is to design, develop and test a fully functional ALM breadboard model, able to work under microgravity conditions of the ISS (International Space Station) and 3D print with engineering polymers with high end mechanical and thermal properties. BEEVERYCREATIVE is bringing its expertise in 3D printing to the consortium, and is responsible for the design of the ALM breadboard model and its operating software.

2016-01-14

PRESS RELEASE – EUROPEAN SPACE AGENCY – PROJECT “MELT”

European Space Agency “MELT” Project
Consortium consisting of 4 European tech companies developing an ALM (Additive Layer Manufacturing) breadboard machine for ESA
3D Hubs 2016 Printer Guide - BEETHEFIRST has been awarded again the “Best of Plug ‘n’Play 3D Printers” - Dear 3D printing community,</br> We are proud to announce that our 3D printer BEETHEFIRST was considered again “Best of Plug’n’Play Printer” in the 3D Hubs 2016 Printer guide.</br> This Guide, based on 5350 reviews from the 3D Hubs community, states that “for users looking for a true plug ‘n’ play 3D printer, such as educators or professionals, the BEETHEFIRST is certainly one of the best options available today.”</br> It also states that “the printer, which features a modern and enclosed design for carrying like a briefcase between printing locations, is considered by many to be one of the most user-friendly designs on the market (…) this is because the printer was designed to be used directly out of the box with the ability to print within minutes.”</br> The 3D Hubs Community also valued BEETHEFIRST’s usability, print and build quality, as well as BEEVERYCREATIVE’s helpful and responsive customer service. We pride ourselves on providing the best customer experience possible and as a result, 95% of BEETHEFIRST owners recommend our 3D printer!</br> It’s the second year in a row that BEETHEFIRST is one of the best in the Plug’n’Play category, for which we thank the 3D Hubs Community and we will keep imprinting change with 3D printing!</br> Download the <a href="utilrecursos/Press-Release_3D-Hubs-Guide2.pdf" target="_blank">3D Hubs Guide here</a></br>

2015-11-25

3D Hubs 2016 Printer Guide

BEETHEFIRST has been awarded again the “Best of Plug ‘n’Play 3D Printers”

© 2020 BEEVERYCREATIVE. Todos os direitos reservados. Este site utiliza cookies. Ao continuar a navegar no site concorda tacitamente com a Política de Cookies da BEEVERYCREATIVE.

Termos & Condições | Livro de Reclamações online