April 24th, 2017
Written by Rita Lobo
Hey guys 🙂
This blogpost will explain how you can change the noozzle on your BEETHEFIRST+ or BEEINSCHOOL 3D printer.
If you own a BEETHEFIRST+ or BEEINSCHOOL 3D printer, the nozzle that comes installed is a 0.4mm hole nozzle.
There is also available for purchase on our website another type of nozzle, the 0.6mm hole nozzle.
What are the differences between 0,4 mm hole nozzle and 0,6mm hole nozzle?
You can purchase both nozzles here.
WARNING: All nozzles used on BEEVERYCREATIVE’s 3D printers must be purchased from BEEVERYCREATIVE. These nozzles were designed specifically for these 3D printers. If you use components that are not recommended by BEEVERYCREATIVE, we cannot ensure the proper functioning of the machine and it will cancel/invalidate the machine’s warranty.
Why would you want to replace or change the nozzle on your 3D printer?
There are two situations in which you might need to replace or change the nozzle: If the nozzle is clogged. If that is the case, our Customer Service team will advise you to do so, and the other situation is if you want to benefit from the advantages of the 0,6mm hole nozzle or to 3D print using TPU-FLEX filament, which requires this nozzle type.
If you are in the first situation, please contact our Customer Service team at email@example.com.
If you just want to 3D print using TPU-FLEX or benefit from the advantages of the 0,6mm hole nozzle listed above, we will now guide you:
Step 1: Open BEESOFT (If you don’t have the latest software version, download it here now)
Step 2: Go to the Maintenance menu on the top right side and choose the Switch nozzle option.
Run the wizzard until the process is complete, it will guide you through the process! 😉
Happy 3D printing! 🙂
Follow us on social media!