Nozzle Details

This new DIY 3D printer kit is a result of a vast market research and hours of development and engineering. It is an open source project, which means this is a versatile product that you can build upon and make it your own.
Post Reply
User avatar
HansMeiser
Posts: 2
Joined: 09 Aug 2019, 00:38

Nozzle Details

Post by HansMeiser » 09 Aug 2019, 00:42

Where can I find the details to the nozzle, i would like to already get some spare parts while my b2x300 is on it’s way.
Which nozzles can I use :?:

DomingosRodrigues
Posts: 112
Joined: 12 Dec 2017, 11:44

Re: Nozzle Details

Post by DomingosRodrigues » 09 Aug 2019, 14:53

Hello HansMeiser,

The default nozzle for the B2X300 is the MK8 nozzle that can be found on various online shops, or can be acquired through us if you contact sales@beeverycreative.com, I would recmmend agains buying the cheapest ones available from china as those usually reduce the print quality and increase the likeliness of a extruder jam.

You can try using other nozzles formats, the thread size is the same as E3D, olson ruby etc, but the length might cause the nozzle to be at a different height than the second nozzle which isn't recommended.

Best regards
Domingos Rodrigues

User avatar
HansMeiser
Posts: 2
Joined: 09 Aug 2019, 00:38

Re: Nozzle Details

Post by HansMeiser » 10 Aug 2019, 11:45

Thanks for the quick reply.
I would always use two nozzles of the same dimensions/type to prevent the height issue,
if this is what you are referring to?

Post Reply