[IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

The versatility of an entry-level 3D printer, engineered to last.
By BEEVERYCREATIVE and Hello 3D Printing World
amorais79
Posts: 4
Joined: 18 Jan 2018, 20:20

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by amorais79 » 24 Jan 2018, 21:28

Hi


Still getting same error

MrDoom
Posts: 223
Joined: 01 Apr 2017, 10:01

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by MrDoom » 11 Feb 2018, 14:48

Hello, the error you are getting is a permission error due to windows, try extracting both the Slic3r and the profiles to your desktop and try again, if that doesn't work execute Slic3r as a administrator and it should be good.

RickRick
Posts: 33
Joined: 22 Dec 2016, 10:22

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by RickRick » 16 Feb 2018, 21:58

Downloaded 1.38.5 32 and 64 but get the same error each time

loading a configuratio file
c:/desktop ect file name Failed

reason unspecified file charecter not found

any suggestions

TPBi
Posts: 10
Joined: 12 Feb 2018, 00:27
Location: Portugal

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by TPBi » 26 Feb 2018, 19:36

Hi,

Someone using Simplify3D?
Can you share the profile?

Thank you

MrDoom
Posts: 223
Joined: 01 Apr 2017, 10:01

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by MrDoom » 27 Feb 2018, 12:37

Hi there,

I have used Simplify 3d with the helloBEEprusa but lately I have the same or better results with Slic3r PE, I will try to find the profile I was using and send it to you, but basically I copied the Slic3r setting to Simplify 3d :p

TPBi
Posts: 10
Joined: 12 Feb 2018, 00:27
Location: Portugal

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by TPBi » 28 Feb 2018, 18:47

I am trying to find the best settings in S3D.
I would be very grateful if you could share the profile.

João Ferreira
Posts: 69
Joined: 03 Aug 2017, 21:16

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by João Ferreira » 01 Mar 2018, 12:18

Hi, I´m using simplify3D and I have lots of profiles for PLA, PTEG and sainsmartFlex, dual extruder printing profiles with some scripts to pause and wait for temperatures to avoid oozing..I can send them to you as soon I get home..

TPBi
Posts: 10
Joined: 12 Feb 2018, 00:27
Location: Portugal

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by TPBi » 01 Mar 2018, 21:09

Perfect!
Thank you

João Ferreira
Posts: 69
Joined: 03 Aug 2017, 21:16

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by João Ferreira » 06 Mar 2018, 16:17

Sorry, completely forgot to post the S3D profiles..can´t find how to attach them here in the forum, so, can you email me? I´ll send them trought there.. (p.s: podemos falar em português por email)

nikodemusz
Posts: 2
Joined: 09 Oct 2017, 13:41
Location: Germany

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

Post by nikodemusz » 11 Apr 2018, 11:36

Hi all,
I'm using now Utlimaker Cura 3.2.1, which is the best I've seen since used already Curo 15.04.3 and Slic3r, where good, but not always. The new Cura has many good profiles as well as Pre-configured Printer Settings. So I just installed, selected the HelloBeePrusa and sliced a Preassembled IrisBox from Thingiverse, which requires good slicing settings and a well adjusted printer. It directly worked the first time.
I would be interested what you say about this software. BTW... The slicing itself works very fast, but the GUI is a kind of Performance lack for my 8years old Intel i7.

Kind regards,
Mario

Post Reply