Page 1 of 1

Slic3r Prusa Edition Uninstall - help

Posted: 19 Aug 2017, 16:45
by João Ferreira
Think my slic3r is broken..can´t find send gcode to heat one extruder and print with the other, reduces the filament feeder rate randomly, and etc..can´t print with it and I need to reset or uninstall it..

Can´t find slicer folder in the system, can´t uninstall it using the add/remove programs feature on the control panel, I already delete the download folder, and redownload it and reinstall it, I already delete all configs manually and reload a new configuration bundle..uff..

Don´t know more..

Do you think it could be a firmware issue..?

Re: Slic3r Prusa Edition Uninstall - help

Posted: 20 Aug 2017, 12:25
by João Ferreira
I think is solved..reinstall firmware and found some folders in windows with slicer profiles configurations..delete those..
Is working again..

Re: Slic3r Prusa Edition Uninstall - help

Posted: 21 Aug 2017, 09:24
by MrDoom
Hi João, as far as I know Slic3r prusa edition isn't installed you just extract the files, as for the configurations, you should have a pdf with a tutorial of how to use and select the correct profiles.

To select the extruders you have to choose in the printer either E0, E1 or dual for both :)

The firmware should have nothing to do with the slicer, I supose you havent configured Slic3r correctly.

Also Slic3r prusa edition increases and decreases the print speed to allow the piece to cool evenly between layers

Re: Slic3r Prusa Edition Uninstall - help

Posted: 21 Aug 2017, 18:39
by João Ferreira
Yes, I don´t know exactly what happened..
It´s working fine now..I have that pdf, and I am messing around with some simple configurations..I suppose I mess them too much :D

Re: Slic3r Prusa Edition Uninstall - help

Posted: 22 Aug 2017, 17:03
by MrDoom
I reeaaaly like Slic3r it has so many option but at the beginning it can be a little daunting, and a simple wrong setting can screw up the entire print xD