Page 1 of 1

Axis Calibration?

Posted: 14 Jul 2017, 23:53
by Xanaden
Hello Ther.
Iam Very new to 3d Printers but read Alot thats why is just bought the Hellobee, assembling worked good Bed leveling worked Okay.

My First Print was quite good but it wasnt in the middel of the Bed as it should be (in Cura it is in the Bissel ofcurse).

Do i need to Calibrate the Axis? i did All the Steps from the Youtube Channel and from the Manuel in neither of them is a Calibration of the Axis needed.

Sorry for my bad English

Re: Axis Calibration?

Posted: 18 Jul 2017, 11:12
by MrDoom

what do you mean by " it is in the Bissel ofcurse" ?

Make sure you have set the correct bed dimensions in cura otherwise it will center the object incorrectly, follow the latest user manual that is available at

Re: Axis Calibration?

Posted: 21 Jul 2017, 21:57
You should read ALL the info here BEFORE diving in to print. This WILL save time and frustration later.


Happy prints....