Page 1 of 2

Files for Cura 2.1.1 (testing)

Posted: 20 Jun 2016, 18:35
by jorge
Hi everyone.

After some users have shared information about supporting helloBEEprusa on the new version of Cura, we prepared the files for Cura 2.1.1 but this are for testing only. We would love to get your feedback.
02 (1).png
02 (1).png (108.27 KiB) Viewed 18753 times
How to configure (instructions for Windows only):
1. Unzip the file:
HBP.zip
(444.68 KiB) Downloaded 610 times
2. On folder C:\Program Files\Cura 2.1\resources\machines, add the file BEEVERYCREATIVE-helloBEEprusa.json
3. On folder C:\Program Files\Cura 2.1\resources\meshes, add the files BEEVERYCREATIVE-helloBEEprusa.stl
4. Start the Cura and add new printer, select BEEVERYCREATIVE and the helloBEEprusa

Re: Files for Cura 2.1.1 (testing)

Posted: 21 Jun 2016, 11:08
by cropduster
Hi there,

are you looking into BeeTheFirst printers too to be supported?

How can I attach a file here, so I can show my json file?

Thanks,

Michael

Edit note by Filipe: Added the beethefirst+.json sent. Not tested by me

Re: Files for Cura 2.1.1 (testing)

Posted: 22 Jun 2016, 10:07
by Filipe
cropduster,

You can send me a link via PM. I will check it, and edit it in your post.

Re: Files for Cura 2.1.1 (testing)

Posted: 22 Jun 2016, 10:12
by DNeves
That's awesome Jorge.

Will try that later! Keep up the good work!

Re: Files for Cura 2.1.1 (testing)

Posted: 18 Jul 2016, 09:23
by siquenique
Hi,

I tried to use this in the MAC version and I have some issues:

I've added the .json file to home/.cura/machines/ and the stl to meshes folder.

When I open cura all appears correctly but i cannot either Save the file (nothing is saved) or Print to USB (opens the print dialog but the temperature doesn't rise and pressing print button doesn't do anything). Did someone had this issue before?

One feedback would be to have the Temperature field as welll activated when we open Cura.

Fixed the issue by changing the name of the STL with the printer picture.


Regards,
Joao

Re: Files for Cura 2.1.1 (testing)

Posted: 29 Sep 2016, 12:07
by stefansiarov
Any update on using Cura 2.1.1 with the HBP :-) ?

Re: Files for Cura 2.1.1 (testing)

Posted: 11 Oct 2016, 15:30
by HALFORD
Does anyone know how to edit the code to get the following;

1st Z move = 20.25mm ; move the bed down clear

Can we write out the date & time as before?

Can we write out the the amount of filament used as before?

Regards
Halford :?

Re: Files for Cura 2.1.1 (testing)

Posted: 13 Nov 2016, 01:55
by carbap
I configured the json file. However my problem is neither the extruder heats nor the table heats :(

Re: Files for Cura 2.1.1 (testing)

Posted: 18 Feb 2017, 13:54
by ruimartinsptl
I'm trying CURA 2 now.
These instructions does not works in macbook, then I created instructions for macbook.
I have some doubts about some values in helloBEEprusa.def.json, if you have a better version, please share.

https://dl.dropboxusercontent.com/u/592 ... _CURA2.zip

EDIT: I added this configurations to Cura Github: https://github.com/Ultimaker/Cura/pull/ ... -281022065, if you have a better version of 'helloBEEprusa.def.json', please update

Re: Files for Cura 2.1.1 (testing)

Posted: 27 Jun 2017, 11:16
by MrDoom
The next beta from Cura, 2.7 I think, will have the official profile from Beeverycreative included :) so this thread will become obsolete.
Although Cura is good I would recommend Slic3r prusa edition as it gets better part finish and very similar print times.