Forum under maintenance. Please contact us at customer_service@beeverycreative.com

[COMMUNITY] INFO DOCUMENT - CALIBRATION GUIDE

The versatility of an entry-level 3D printer, engineered to last.
By BEEVERYCREATIVE and Hello 3D Printing World
Post Reply
HALFORD
Posts:128
Joined:26 Aug 2015, 12:19
Location:MANSFIELD, ENGLAND
[COMMUNITY] INFO DOCUMENT - CALIBRATION GUIDE

Post by HALFORD » 09 May 2016, 20:28

Hello All,
Please find the enclosed documentation guide regarding Calibration of your Hello BEE Prusa;

1. Microsoft Word Document
2. Adobe PDF of the above document
3. Adobe PDF drawing of the 20mm calibration cube
4. Model .stl of the 20mm Calibration cube
5. Hello BEE Prusa settings file from Cura (.ini)

USE THIS LINK; https://drive.google.com/file/d/0B0RFSY ... sp=sharing

any questions please contact me.
Regards
Paul Halford

jorge
BEEVERYCREATIVE
Posts:51
Joined:30 Jul 2015, 17:18

Re: INFO DOCUMENT - CALIBRATION GUIDE

Post by jorge » 10 May 2016, 10:43

Hi Paul.

Great work and thanks for sharing <3

I suggest to add date of last update to the document.
BEEVERYCREATIVE
Research and Development Team

Filipe

Re: INFO DOCUMENT - CALIBRATION GUIDE

Post by Filipe » 11 May 2016, 10:22

Amazing work :)

With some modifications, it can be used for all version of hBp.

Thanks for sharing with the community!

Ryche
Posts:8
Joined:16 Apr 2016, 14:26

Re: INFO DOCUMENT - CALIBRATION GUIDE

Post by Ryche » 15 May 2016, 04:13

Thanks for posting. I went through the instructions this weekend and it upped the quality of my prints.

HALFORD
Posts:128
Joined:26 Aug 2015, 12:19
Location:MANSFIELD, ENGLAND

Re: INFO DOCUMENT - CALIBRATION GUIDE

Post by HALFORD » 15 May 2016, 21:38

Thanks for the feedback, Happy to help.
Would this guide have been helpfull when assembly was complete?
Which version of HBP do you have

Halford

HALFORD
Posts:128
Joined:26 Aug 2015, 12:19
Location:MANSFIELD, ENGLAND

Re: INFO DOCUMENT - CALIBRATION GUIDE

Post by HALFORD » 16 May 2016, 20:13

Ryche, can you provide before and after photos to see the differance?
Regards

Kike
Posts:17
Joined:20 Jun 2016, 21:55
Location:Portugal
Contact:

Re: INFO DOCUMENT - CALIBRATION GUIDE

Post by Kike » 29 Jun 2016, 03:14

HALFORD this guide is AMAZING. I thank you from the depths of my hearth for making it. It helped me fine tune the printer a little better, and most important, it taught me a lot about how 3D Printing works.

This post should be sticky
Mechanical Engineering Finalist
Working on a thesis involving 3D Printing of Sensors with the aid of copper and ferromagnetic infused filaments

Filipe

Re: INFO DOCUMENT - CALIBRATION GUIDE

Post by Filipe » 29 Jun 2016, 10:41

Kike wrote:HALFORD this guide is AMAZING. I thank you from the depths of my hearth for making it. It helped me fine tune the printer a little better, and most important, it taught me a lot about how 3D Printing works.

This post should be sticky
And so it was done :)

Accetta
Posts:1
Joined:10 Oct 2017, 09:27

Re: INFO DOCUMENT - CALIBRATION GUIDE

Post by Accetta » 15 Oct 2017, 16:08

Filipe wrote:Amazing work :)

With some modifications, it can be used for all version of hBp.

Thanks for sharing with the community!
That's a good idea Filipe! I'm going to try and do this.

RickRick
Posts:34
Joined:22 Dec 2016, 10:22

Re: [COMMUNITY] INFO DOCUMENT - CALIBRATION GUIDE

Post by RickRick » 18 Nov 2017, 19:10

Edit Ignore this, the gaps were present in slicr due to me setting the wrong nozzel size 0.5 not 04

So i'm finally printing the calibration cube I was really close after previous attempts at calibrating but now i'm getting right down to the correct size and wall thickness however the corners are not meeting up theres a fine slit down each one any ideas?

Post Reply