Page 3 of 3

Re: [FIRMWARE] helloBEEprusa based on Marlin 1.1.0-RC3

Posted: 02 May 2016, 23:42
by mario
Hello Filipe,

i have tried via the manual as you suggested but i got this error: Temperature.cpp:749: confused by earlier errors, bailing out
Error compiling.

Any thoughts?

Thank you,

MDias

Re: [FIRMWARE] helloBEEprusa based on Marlin 1.1.0-RC3

Posted: 04 May 2016, 10:32
by Andre_A
Hi mario,
if it's a "compiling error", I can presume two options:
Or you have a incorrect settings in the Marlin;
Or you have something write in the file "Temperature.ccp", probably in the 749 line, without you knowing (it happens with me one time, when I opened the Marlin, I wrote a "a" in a file without knowing).

Can you share a picture with the erro to see if there are more important information? ;)

Re: [FIRMWARE] helloBEEprusa based on Marlin 1.1.0-RC3

Posted: 13 Sep 2016, 13:49
by stig.joergensen
Is there any plan to merge with rc7?

Re: [FIRMWARE] helloBEEprusa based on Marlin 1.1.0-RC3

Posted: 16 Sep 2016, 16:29
by Geoffrey Borny
Just do it by yourself. It isn't difficult to do, just copy the value's from the config.h and adv_config.h from the older version in the newer one and done. I've done this yesterday and I'm testing it at the moment.
If you want it I will post the firmware that's running on my machine in the forum.

Re: [FIRMWARE] helloBEEprusa based on Marlin 1.1.0-RC3

Posted: 16 Sep 2016, 16:41
by fgarcia
Geoffrey Borny

If you could put it in the forum working that would be great.

Cheers.

Re: [FIRMWARE] helloBEEprusa based on Marlin 1.1.0-RC3

Posted: 26 Sep 2016, 13:56
by fennec_inc
Geoffrey, are you using the 2 line display controller or the RepRap Graphic one? I'd like to upgrade my firmware, but the versions I found so far do not support the graphic display (the procedure for loading/unloading filament was written for the 2 line display and thus causes errors when I want to compile for the graphic display one)

Re: [FIRMWARE] helloBEEprusa based on Marlin 1.1.0-RC3

Posted: 21 Feb 2017, 01:41
by ruimartinsptl
Any news about RC8?

Re: [FIRMWARE] helloBEEprusa firmware 1.1.0-RC3 [CLOSED and OUDATED]

Posted: 05 Jul 2017, 16:14
by smoreira
Hi all,

We're closing this thread since this firmware version is outdated.
You can find the updated version is this new topic: viewtopic.php?f=8&t=719

Cheers,

Sergio