Page 1 of 8

[COMMUNITY] Prints from our HBP's

Posted: 25 Nov 2015, 17:38
by DNeves
Hi Guys!

I'm opening this topic for everybody that want to share some pictures of the latest prints that you guys have done. I personally like to see prints from others, specially from people that has the same printer that I do! It allows me to know it better ;) and we can all help each other! By sharing this, we can simply congratulate or make a constructive comment to improve even more our prints! :D

I can start by sharing one print I've made. Let's try to give some information regarding the print (simple info). I'll do an example to be used as "template":

Part: Mini cross bow
Description: Use just for fun! :D
Material: PLA
Resolution: 0,2mm
Design: http://www.thingiverse.com/thing:509659
Image

Re: Prints from our HBP's

Posted: 25 Nov 2015, 19:53
by dbarciela
Very nice little thing. Please post the link to the source to credit the author of the design and for others to print. I suggest others to do the same in the future. If the design is yours, nevermind, you may not want to share it for valid reasons.

Re: Prints from our HBP's

Posted: 25 Nov 2015, 20:17
by DNeves
dbarciela wrote:Very nice little thing. Please post the link to the source to credit the author of the design and for others to print. I suggest others to do the same in the future. If the design is yours, nevermind, you may not want to share it for valid reasons.
You're absolutely right! ;) Already updated my previous post! :)

Re: Prints from our HBP's

Posted: 26 Nov 2015, 10:19
by Filipe
Good idea :)

From the start, the community usually shares their prints on the facebook group:

https://www.facebook.com/groups/beevery ... community/

But, I don't see any harm on having a section here dedicated to share prints, and more details about them.

Re: Prints from our HBP's

Posted: 26 Nov 2015, 10:39
by DNeves
At this moment I'm building variable number stamp. Here is the set of the first 10 digits!

Part: Stamp digits from 0 to 9
Description: Stamps for numbering limited edition items (for example)
Material: PLA
Resolution: 0,2mm
Design: http://www.thingiverse.com/thing:1165580
Image

Re: Prints from our HBP's

Posted: 27 Nov 2015, 21:38
by HALFORD
Marvin at 0.050mm layers
Print time 1:44mins
temp:210
infil 15%

http://postimg.org/gallery/2nurg42wq/

Re: Prints from our HBP's

Posted: 28 Nov 2015, 01:08
by DNeves
Whats the material Halford? I never tried that resolution.. But I think I get better results with 0.1mm layers. Isn't the temp too high? (in case it is PLA?)

Re: Prints from our HBP's

Posted: 30 Nov 2015, 22:44
by HALFORD
Yes PLA it seems to flow better at @210-215.
It does seem a bit "blobby".
Any ideas how to reduce this?

Re: Prints from our HBP's

Posted: 01 Dec 2015, 11:54
by DNeves
HALFORD wrote:Yes PLA it seems to flow better at @210-215.
It does seem a bit "blobby".
Any ideas how to reduce this?
Not quite sure, but you can try to reduce the temp by 5 degrees and see if the PLA still runs smoothly. I don't think that issue might be related with retraction speed in that particular design..

Re: Prints from our HBP's

Posted: 01 Dec 2015, 11:59
by DNeves
Part: Case
Description: Case for storing the number stamps.
Material: PLA
Resolution: 0,2mm
Design: http://www.thingiverse.com/thing:1165601

Image

Image

Image