problems with leveling module

Printing filament, accessories and spare parts
Post Reply
Erwin Jonkhart
Posts: 2
Joined: 23 Jun 2020, 18:02

problems with leveling module

Post by Erwin Jonkhart » 04 Aug 2020, 13:51

The motor vibrates continuously and the temperature of the printheads and bed is not shown on the display.

As soon as I touch the motor of the calibration module lightly, the temperature of the printheads and the bed does appear on the screen (sometimes random temperatures, sometimes the correct temperature).


allready recieved an additional cable and connected it between connector and motherboard..still no difference..

help

regards Erwin

DomingosRodrigues
Posts: 189
Joined: 12 Dec 2017, 11:44

Re: problems with leveling module

Post by DomingosRodrigues » 01 Sep 2020, 12:42

Hello Erwin,

Most likely your auto calibration module or motherboard have a defect. Please contact customer_service@beeverycreative.com for a better support.

Best regards
Domingos Rodrigues

Post Reply