[FIXED] I'm missing somehing EC11 then EC61 & EC11 again

This new DIY 3D printer kit is a result of a vast market research and hours of development and engineering. It is an open source project, which means this is a versatile product that you can build upon and make it your own.
Post Reply
User avatar
jaume.figueres
Posts: 8
Joined: 08 Jan 2020, 19:38

[FIXED] I'm missing somehing EC11 then EC61 & EC11 again

Post by jaume.figueres » 08 Jan 2020, 20:12

Hi,
first of all hello to everyone's
I just ensambed my printer then upgraded and serial nuber entered, everythings fine untill selftest run.

firts time I run it stops on 1st step (extruder 1 EC11)
restart an test runs ok untill power loss detector (EC61), restart again sevearl times with same result, self test runing ok untill power loss detector, and then suddenly, is stops again on EC11 extruder temp sens too low :shock:

any advice, I doublecheked all conections and everything looks fine.

thanks

srodrigues
Posts: 17
Joined: 04 Mar 2019, 13:41

Re: I'm missing somehing EC11 then EC61 & EC11 again

Post by srodrigues » 16 Jan 2020, 17:22

Hello,

Thanks for getting in touch with us. We have the information from customer service that this problem with your printer is solved.

If you need some additional help or want to share your impressions you are welcome.

User avatar
jaume.figueres
Posts: 8
Joined: 08 Jan 2020, 19:38

Re: I'm missing somehing EC11 then EC61 & EC11 again

Post by jaume.figueres » 21 Jan 2020, 15:11

Hi,
still not solved.

srodrigues
Posts: 17
Joined: 04 Mar 2019, 13:41

Re: I'm missing somehing EC11 then EC61 & EC11 again

Post by srodrigues » 03 Feb 2020, 11:32

Hi,
What is your current problem? We are here to help you.

User avatar
jaume.figueres
Posts: 8
Joined: 08 Jan 2020, 19:38

Re: I'm missing somehing EC11 then EC61 & EC11 again

Post by jaume.figueres » 10 Feb 2020, 10:37

Now my printer is working, after realizing I had a defective main board Paulo from support has sended me a new board (hope you feel better) and after a couple of extra weeks, everything seems ok.


I have to say that, you have been kind and nice to me and solved the problem without any objection.not fast, but reliable.

Post Reply