Firmware Release: B2X300-20181128

This new DIY 3D printer kit is a result of a vast market research and hours of development and engineering. It is an open source project, which means this is a versatile product that you can build upon and make it your own.
Post Reply
User avatar
tiagofgs
Posts: 16
Joined: 16 Apr 2018, 15:35

Firmware Release: B2X300-20181128

Post by tiagofgs » 30 Nov 2018, 17:50

Hi everyone,
There is a new stable release of the firmware for your B2X300, please upgrade to get the latest features and bug fixes.

We recommend you use the B2X300 Firmware Update tool which you can download here: https://github.com/beeverycreative/B2X3 ... re_Updater alternatively, you can flash your 3D printer using the Arduino IDE, check out how to do it here: viewtopic.php?f=17&t=1274
Changelog B2X300-20181128:
  • Nozzle height now homes after finishing
  • After finishing home X will move 20mm to the left
  • After the process X carriage will move 20mm to the left
  • On change filament temperature will stabilize at the set temperature (B2X300), not 10 degree before(helloBEEprusa)
  • Nozzle offset live adjust is more easily acessible and saves to EEPROM0
  • Powerloss recovery recovers the correct bed temperature
  • Powerloss recovery autorecovers print
  • Fixed compiler warning caused by SERIAL_ECHO_BIN8

NEW FEATURES:
  • Power-loss recovery auto-recovers print
    After a power loss, if the temperature of the heated bed is less than 5 degrees below from the set temperature the print will automatically resume


If you have suggestions or happen to find a bug on this firmware version, please comment below so we can start to work on it right away.

Happy printing! :D
BEEVERYCREATIVE
Research and Development Team

pjferreira
Posts: 2
Joined: 03 Dec 2018, 17:37

Re: Firmware Release: B2X300-20181128

Post by pjferreira » 03 Dec 2018, 17:55

Hi there,

After we done the firmware update the auto level process just doesnt works as it should :( , it keeps always switching in the same place in the heated bed.
If you want we can send a video.


Thanks,

tgala
Posts: 76
Joined: 25 Aug 2015, 14:56

Re: Firmware Release: B2X300-20181128

Post by tgala » 04 Dec 2018, 14:30

Hi @pjferreira,
Yes, please send a video, that should help us troubleshoot the problem.

Meanwhile, can you please do the following:
1) Post a picture of your "About" menu (don't forget to scroll and include the values from both screens)
2) Reset settings (Menu > Machine settings > Save/Reset settings > Reset settings > Confirm!) - you should run the "Self-test wizard" again after this step.

Let me know how it goes!

pjferreira
Posts: 2
Joined: 03 Dec 2018, 17:37

Re: Firmware Release: B2X300-20181128

Post by pjferreira » 04 Dec 2018, 17:35

:D Thanks, reseting and running "self-test wizard" was enough

tgala
Posts: 76
Joined: 25 Aug 2015, 14:56

Re: Firmware Release: B2X300-20181128

Post by tgala » 05 Dec 2018, 10:25

Awesome! Glad I could help :D
By the way, how are you enjoying the printer?

Post Reply