B2X300 Recommended Printing Profiles

This new DIY 3D printer kit is a result of a vast market research and hours of development and engineering. It is an open source project, which means this is a versatile product that you can build upon and make it your own.
Post Reply
User avatar
tiagofgs
Posts: 20
Joined: 16 Apr 2018, 15:35

B2X300 Recommended Printing Profiles

Post by tiagofgs » 28 Aug 2018, 15:15

Hello!
We've made available on GitHub a few Cura printing profiles to help get you started with your B2X300.
These profiles will be regularly updated so keep an eye out on our GitHub repository: https://github.com/beeverycreative/B2X3 ... g_Profiles

Along with the profiles, there is a Cura project file to help you quickly setup Cura to work with your B2X300.

These printing profiles have been developed to give consistent and high quality prints using BEEVERYCREATIVE's filament (which you can get here: https://shop.beeverycreative.com/). If you're using other brands, you might need to adjust some settings but the provided profiles should be a good starting point.

We invite you to share any modifications you make to the provided profiles by submitting a pull request to the GitHub repository or by opening a new thread on the forum. Also, feel free to comment below if you need help setting up Cura or find any issue with the profiles.

Cheers!
BEEVERYCREATIVE
Research and Development Team

User avatar
tiagofgs
Posts: 20
Joined: 16 Apr 2018, 15:35

Re: B2X300 Recommended Printing Profiles

Post by tiagofgs » 20 Nov 2018, 12:45

Code: Select all

Topic updated on 2018/11/20
BEEVERYCREATIVE
Research and Development Team

Post Reply