Search found 166 matches

by DomingosRodrigues
04 Oct 2019, 10:51
Forum: B2X300
Topic: Improving by replacing parts
Replies: 7
Views: 1663

Re: Improving by replacing parts

Hi there Gni, That's the kind of mindset we hope from someone with a kit printer, always trying to improve it piece by piece, so don't worry we wont shoot you down :D As for your questions: 1) Igus bushings (they aren't technically bearings as they have no moving parts) are good but can lead to some...
by DomingosRodrigues
04 Oct 2019, 10:34
Forum: BEESOFT
Topic: BEESOFT 4.0.8 - new release
Replies: 2
Views: 1356

Re: BEESOFT 4.0.8 - new release

Hello Edevil,

Please contact customer_service@beeverycreative.com with that information so they can help you fix it.

It appears there was some problem during the installation procedure that is making beesoft unable to communicate with the slicer hence those errors.

Best regards
Domingos Rodrigues
by DomingosRodrigues
03 Oct 2019, 15:18
Forum: GENERAL
Topic: Delivery time
Replies: 3
Views: 938

Re: Delivery time

Hello Markus,

it is indeed correct, due to the demand of the kit and some supply delays we can't guarantee the delivery any sooner.

We are also working on improving some details of the kit for a better user experience :)

Best regards
Domingos Rodrigues
by DomingosRodrigues
30 Sep 2019, 14:03
Forum: B2X300
Topic: exact size of glass bed
Replies: 3
Views: 964

Re: exact size of glass bed

Thanks a lot for the info.

I will look into that :)
by DomingosRodrigues
30 Sep 2019, 14:03
Forum: B2X300
Topic: B2X300 bowden feed improvement
Replies: 3
Views: 884

Re: B2X300 bowden feed improvement

Hello Finas, Right now as the heat throat is custom I don't think you can find it online, you would need to order and manufacture or order your own from a metal CNC. We can provide the specification if necessary. But I would recommend trying to use the printer without changing any parts at the begin...
by DomingosRodrigues
26 Sep 2019, 23:51
Forum: BEETHEFIRST
Topic: Spool holder STL
Replies: 1
Views: 652

Re: Spool holder STL

Hello Dan, Please contact customer_service@beeverycreative.com they will provide you the files and also guide you on the acquisition of the necessary equipment and processes for the repair. If you have a BTF, non plus, there is no upgraded extruder but installing a new extruder will return your prin...
by DomingosRodrigues
26 Sep 2019, 12:06
Forum: B2X300
Topic: B2X300 CPU overclock
Replies: 2
Views: 730

Re: B2X300 CPU overclock

Hello finas, No the board cannot be overclocked as it would mess up the timing used in multiple processes on the printers firmware. The printer can be sped up significantly if it is assembled correctly you just need to tune your Cura settings to match you specific printer/material combo. For example...
by DomingosRodrigues
26 Sep 2019, 12:00
Forum: B2X300
Topic: B2X300 bowden feed improvement
Replies: 3
Views: 884

Re: B2X300 bowden feed improvement

Hello finas, Replacing the original bowden tube with capricorn tube will only reduce the retraction and oozing a bit. To reduce the necessity to use oil you either need to increase the cooling of the extruder a lot with a 40x40x20 fan (not recommended as it causes lots of noise but it is a quick ove...
by DomingosRodrigues
24 Sep 2019, 10:26
Forum: B2X300
Topic: exact size of glass bed
Replies: 3
Views: 964

Re: ecaxt size of glass bed

Hello finas, Never heard of sital glass, where do you buy it from, I would like to experiment with it. As for the original glass, it is normal glass on a size of 304x216 (Try to get one as close as possible to these dimensions in order to fit corretly, especially on the 304 measure, as 305 can colli...
by DomingosRodrigues
18 Sep 2019, 10:27
Forum: B2X300
Topic: What If we could start on that failure point?
Replies: 1
Views: 666

Re: What If we could start on that failure point?

Hi Mic_Hazelburn, that is a really good idea, as soon as I can I will see if that is possible to implement in the firmware of the machine of the B2X300 as a advanced option, I suppose if the original profiles are used we could skip to the correct position, the only caveat being you need to know the ...