Search found 82 matches

by tgala
17 Apr 2018, 16:35
Forum: helloBEEprusa
Topic: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles
Replies: 22
Views: 21186

Re: [IMPORTANT] helloBEEprusa recommended Slicer and printing profiles

The new Cura has many good profiles as well as Pre-configured Printer Settings. (...) I would be interested what you say about this software.
@João Ferreira, @TPBi, @RickRick, @diogolage, @MrDoom, @amorais79, care to comment? :)
by tgala
11 Dec 2017, 12:11
Topic: Installation on raspberry
Replies: 1
Views: 3787

Re: Installation on raspberry

Hi! Unfortunately BEESOFT only supports the BEETHEFIRST line of printers (BEETHEFIRST, BEETHEFIRST+, BEETHEFIRST+A, BEEINSCHOOL, BEEINSCHOOL A). The helloBEEprusa is not supported because it is targeted at makers and thinkerers and it was designed to give the user a broader choice of software and ha...
by tgala
08 Mar 2017, 12:25
Topic: Beethefirst LED lighting not work.
Replies: 1
Views: 3816

Re: Beethefirst LED lighting not work.

Hi F@ri4!
Is it just the LEDs that don't work or is the whole printer having problems?
Sometimes the LEDs go bad after a while, unfortunately. Have you tried contacting customer support (
by tgala
08 Mar 2017, 12:20
Forum: helloBEEprusa
Topic: [SOLVED] Change Simple Firmware Settings
Replies: 4
Views: 4890

Re: [SOLVED] Change Simple Firmware Settings

Can I suggest you upload your changes to a github repository? Or create a patch (using diff for all files) from the original repository so we can quickly apply the modifications?
by tgala
08 Mar 2017, 12:13
Forum: helloBEEprusa
Topic: Axis issue?
Replies: 2
Views: 3234

Re: Axis issue?

Hi Mário! It looks like one of the cables from the motor might have broken. Ususally when that happens, the movement becomes noisy and intermitent (because only one of the phases is switching and the other phase is physically disconnected due to the broken cable). I suggest you troubleshoot this pro...
by tgala
08 Mar 2017, 12:05
Forum: helloBEEprusa
Topic: Octoprint
Replies: 2
Views: 3375

Re: Octoprint

Octoprint should work fairly out-of-the-box with your helloBEEprusa but I haven't tested it yet.
I would love to see you results!!
by tgala
17 Feb 2017, 11:17
Topic: BEESOFT most recent beta versions
Replies: 3
Views: 10415

Re: BEESOFT most recent beta versions

Hi mariareese,
Tha latest betas can be downloaded through the same link: ... e/BEESOFT/
If you're looking for the latest stable version though you can find it on BEEVERYCREATIVE's website, under BEESOFT. Hope that helps :)
by tgala
15 Feb 2017, 10:11
Forum: helloBEEprusa
Topic: two extrsuion/color print
Replies: 2
Views: 3100

Re: two extrsuion/color print

Hi! By the looks of it I'm guessing the extruders are not perfectly parallel to the bed - one extruder is higher than the other and that causas a gap when transitioning from black to white but not the other way around. Again, this is just a guess. I think there is a guide or a video (or a forum post...
by tgala
09 Feb 2017, 13:06
Forum: helloBEEprusa
Topic: Heat bed only reaching 62 / 100
Replies: 3
Views: 3615

Re: Heat bed only reaching 62 / 100

Hey Matthew, Sorry about that LED thing, I'm used to work with several printers and some of them have a little LED to see if the bed is on, despite this, there is an LED on the control board that tells you if the bed is receiving power - the LED is labeled D11 and should be near the bed connector. W...
by tgala
09 Feb 2017, 12:54
Topic: Parts of 3D printer
Replies: 3
Views: 6403

Re: Parts of 3D printer

Hi! if you download the whole repository at once you probably won't have those issues. Get it here: (to get this link you need to be on the root of the repository, on the right-hand side there will be a green button saying ...