Search found 13 matches

by cropduster
09 Dec 2019, 09:14
Forum: BEESOFT
Topic: Installation on raspberry
Replies: 5
Views: 4701

Re: Installation on raspberry

Thank you!!

What about Repetier Server? Can it be connected to that one for pushing gcode to the printer?

Thx,

Michael
by cropduster
01 Dec 2019, 08:14
Forum: BEESOFT
Topic: Installation on raspberry
Replies: 5
Views: 4701

Re: Installation on raspberry

I am running my Prusa i3 mk3 with Octoprint, can I configure the same Octoprint instance to also connect to the BTF+? I don‘t use Octoprint for slicing, I just want to send gcode to the BTF+. So I don‘t need Beesoft or Beeweb on my raspberry pi probably.

Any suggestions?

Michael
by cropduster
12 Jul 2016, 08:25
Forum: BEETHEFIRST+
Topic: Easy fix for warping & other goodies
Replies: 2
Views: 5502

Re: Easy fix for warping & other goodies

Hi Hugo,

what do you print? PLA?

I mostly have trouble getting t-Glase to stick, all others seem to be good. Even Nylon 230 sticks well on blue tape with no other stuff.

I wanted to try a wooden plate (MDF) to try with Nylon 618.

Regards,

Michael
by cropduster
21 Jun 2016, 11:12
Forum: BEESOFT
Topic: Support for Cura 2.x
Replies: 13
Views: 20833

Re: Support for Cura 2.x

Any json config planned for the BeeTheFirst?

Thanks,

Michael
by cropduster
21 Jun 2016, 11:08
Forum: helloBEEprusa
Topic: Files for Cura 2.1.1 (testing)
Replies: 10
Views: 19732

Re: Files for Cura 2.1.1 (testing)

Hi there,

are you looking into BeeTheFirst printers too to be supported?

How can I attach a file here, so I can show my json file?

Thanks,

Michael

Edit note by Filipe: Added the beethefirst+.json sent. Not tested by me
by cropduster
09 Jun 2016, 15:35
Forum: BEESOFT
Topic: Support for Cura 2.x
Replies: 13
Views: 20833

Re: Support for Cura 2.x

I will start testing my json profile as soon as I will be back from my travel.

Best regards,

Michael
by cropduster
09 Jun 2016, 08:31
Forum: BEESOFT
Topic: Support for Cura 2.x
Replies: 13
Views: 20833

Re: Support for Cura 2.x

Here is the link to settings that need to be specified in the .json file to make a non UM printer work with Cura 2.x. https://ultimaker.com/en/resources/20511-change-machine-settings It would be great if the BeeVeryCreative team would provide a version of this json machine file so we can work with C...
by cropduster
07 Jun 2016, 21:35
Forum: BEESOFT
Topic: Support for Cura 2.x
Replies: 13
Views: 20833

Re: Support for Cura 2.x

Hi, just to be sure, I created a gcode for one of my projects in Cura 2.12. Can you check (just the first few lines, especially the start gcode) whether this looks good to you: ;FLAVOR:RepRap ;TIME:14413 M104 S220.000000 M109 S220.000000 M300 G28 M206 X500 M107 G92 E M642 W1 M130 T6 U1.3 V80 G1 X-98...
by cropduster
07 Jun 2016, 19:14
Forum: BEESOFT
Topic: Support for Cura 2.x
Replies: 13
Views: 20833

Re: Support for Cura 2.x

Hi, I extracted parts of the json file I created for the BeeTheFirst+. I am not sure about the machine nozzle heat up / down speed and head shape values. Any input on that from your side? Thanks, Michael machine_settings": { "machine_width": { "default": 190 }, "machine_height": { "default": 125 }, ...
by cropduster
07 Jun 2016, 12:06
Forum: BEESOFT
Topic: Support for Cura 2.x
Replies: 13
Views: 20833

Re: Support for Cura 2.x

Good to hear that there is something going on.

What about support for BeeTheFirst+? I assume they same method of providing a custom json file applies here as well.

Kind regards,

Michael