Search found 5 matches

by Balas
06 Jun 2016, 15:59
Forum: helloBEEprusa
Topic: [COMMUNITY] GCode End change it so it stays at the X/Y edstops points
Replies: 3
Views: 5091

Re: GCode End

Hi Stig,

thank you for the reply, wouldn't that just leave the bed where it ended regarding Y and just home the X?
What I ideally would like it for is to go to both XY endstops, resulting in the print bed all the way at the front
by Balas
06 Jun 2016, 12:43
Forum: helloBEEprusa
Topic: [COMMUNITY] GCode End change it so it stays at the X/Y edstops points
Replies: 3
Views: 5091

[COMMUNITY] GCode End change it so it stays at the X/Y edstops points

Hi, My GCode End always ends up with the nozzle at the XY Home (front left corner), leaving the print behind it. How can I change it so it stays at the X/Y edstops points so that the print is in front? Here's my End Code: M104 S0 ;extruder heater off M140 S0 ;heated bed heater off (if you have it) G...
by Balas
06 Jun 2016, 12:32
Forum: BEESOFT
Topic: Support for Cura 2.x
Replies: 13
Views: 22448

Re: Support for Cura 2.x

The way to add a printer is from the backend. there's a JSON file for every machine located at: Mac Version — Applications/Cura/Contents/Resources/cura/resources/machines In addition to this file, there's also the possibility to add custom logos and 3d models of the bed for visualisation. I have a f...
by Balas
15 Apr 2016, 12:02
Forum: helloBEEprusa
Topic: [SOLVED] Extruders markings
Replies: 2
Views: 5490

Re: Extruders markings

Hello Andre_A, thank you for the response! Yes, I figured much and went ahead and assembled it correctly :P, Now I just need to remember that all the cabling is relative to the other (Cables 0 -> Extruder 1, positioned at left)... Regarding the extruder alignment, what screw can I use for this? it's...
by Balas
14 Apr 2016, 23:47
Forum: helloBEEprusa
Topic: [SOLVED] Extruders markings
Replies: 2
Views: 5490

[SOLVED] Extruders markings

Hello everyone, New to the forum and all this 3D printing world. I'm assembling a HelloBeePrusa for the first time and I think my extruders have the markings (0/1) switched. The heat sinks have no markings like on the videos. From what I understand, the heat sinks are the ones that should be closer ...