Search found 5 matches

by Volker_Bollig
01 Apr 2016, 21:24
Forum: helloBEEprusa
Topic: [COMMUNITY] Prints from our HBP's
Replies: 72
Views: 78989

Re: [COMMUNITY] Prints from our HBP's

Hello, this is a great idea. I did the same for my spools. I also used ball bearings and a rod through the entire holder. Thus the thread (screw) part needs to be hollow too. This weakened the construction and I broke it during testing :lol: The other problem I faced is that I have spools with at le...
by Volker_Bollig
22 Mar 2016, 18:36
Forum: helloBEEprusa
Topic: [COMMUNITY] Prints from our HBP's
Replies: 72
Views: 78989

Re: [COMMUNITY] Prints from our HBP's

Hi, thanks alot, :D Well, I do not have a lot of free time but I took a week of my vacancies for building the printer. I knew that this would be time consuming. Actually, I did not yet overcome the problems with ABS. The workspace heats up to 50°C - 60°C inside, there is no airflow other than intern...
by Volker_Bollig
21 Mar 2016, 19:20
Forum: helloBEEprusa
Topic: [COMMUNITY] Prints from our HBP's
Replies: 72
Views: 78989

Re: [COMMUNITY] Prints from our HBP's

Hello, here is a short video about the project and the first test drive: https://www.youtube.com/watch?v=_7NjoMD-poU I had massive problems with large parts not sticking to the surface, especially with the ABS. The screws are printed in ABS (230/90) and the chassis frame in PLA (220/60). The surface...
by Volker_Bollig
19 Mar 2016, 14:39
Forum: helloBEEprusa
Topic: [COMMUNITY] Prints from our HBP's
Replies: 72
Views: 78989

Re: [COMMUNITY] Prints from our HBP's

Hello again, here are some prints from my HBP. The first is a steering wheel handle. I use it for easy single handed manouvering of Farming Simulator vehicles: http://www.vmbollig.de/3d/handle_01.jpg http://www.vmbollig.de/3d/handle_02.jpg http://www.vmbollig.de/3d/handle_03.jpg http://www.vmbollig....
by Volker_Bollig
13 Mar 2016, 15:14
Forum: helloBEEprusa
Topic: [COMMUNITY] Prints from our HBP's
Replies: 72
Views: 78989

Re: [COMMUNITY] Prints from our HBP's

Hello, I made a housing for my HBP in order to keep printing quiet and at a constant temperature as well as free of disturbing airflow. This is because I had severe warping problems printing ABS. For the housing I made a mount for a surveillance camera and a filament spool holder: The housing with a...