Search found 13 matches

by wayne.kinne
12 Aug 2019, 15:45
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell - SOLVED ( I hope )

As of today the printer is working. Support was very friendly, dealing with the delays created by being on the opposite side of the planet made for many delays, but we did work through it. I almost hate to give a thumbs up since I have only printed two parts with it so far, but they were 36 hour pri...
by wayne.kinne
24 Jul 2019, 16:02
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell

This printer has failed again. It appears the same board as before has failed again. The long time it takes to get answers, get parts, and being without a printer I paid over $700 for makes buying this printer a bad decision. I could have purchased 3 printers for the same money. At this point I woul...
by wayne.kinne
18 Jul 2019, 00:43
Forum: B2X300
Topic: Is Bed leveling not working for anyone else?
Replies: 4
Views: 840

Is Bed leveling not working for anyone else?

I have bed leveling on one of my other 3D printers and it works flawlessly, but on my B2X300 it always needs tweaking, one side is a little off and I have to play with the bed mounting screws to tune it in. Also nozzle height setting seems to be very picky, sometimes working but often being too tigh...
by wayne.kinne
12 Jul 2019, 15:52
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell

Posting an update: A warning to anyone buying this printer, LOCKTIGHT everything!!! I have six 3D printers and I haven't ever seen anything like this, every nut and bolt comes loose if not locktighted. Also if any part is defective and you live in the USA be prepared for a long wait on replacement p...
by wayne.kinne
03 Jun 2019, 12:41
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell

Thank you.

I re-seated every plug and still getting the error. Checked all the wiring, everything looks good. Contacting Customer Support.
by wayne.kinne
31 May 2019, 17:24
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell

I wont level, it did before the overheat thing. uploaded a video to same: https://github.com/wkinne/wkinne It did work at first, it printed half a part before the overtemp failure. It checked bed level before starting the print and everything. And it was printing a very nice looking part. Running se...
by wayne.kinne
30 May 2019, 20:27
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell

still not running bed test even at start.

Taking a break, will re-flash and try again later
by wayne.kinne
30 May 2019, 20:18
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell

First thing I see in Gcode is it changing temp back to 160? Why would it do that? line 24

I'm running ABS at 245 and 110

fixing that and trying again
by wayne.kinne
30 May 2019, 19:56
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell

same, what did I do wrong? ;-P. I am using Cura and have no problem continuing with Cura. Are you saying I need to copy/past the startGcode and endGcode in the file from the thing I downloaded? Uploading the new gcode after setting up the printer correctly in Cura,( I think ) same gethub: https://gi...
by wayne.kinne
30 May 2019, 18:18
Forum: B2X300
Topic: B2X300 the printer from hell
Replies: 18
Views: 2224

Re: B2X300 the printer from hell

Let me know if this works.

https://github.com/wkinne/wkinne

And I have re-flashed and all the suggestions have been attempted. Still the same problem.

Thanks,
Wayne Kinne