Coding question turn of heaters

The versatility of an entry-level 3D printer, engineered to last.
By BEEVERYCREATIVE and Hello 3D Printing World
Post Reply
RickRick
Posts: 34
Joined: 22 Dec 2016, 10:22

Coding question turn of heaters

Post by RickRick » 31 Aug 2017, 20:45

Ok i know nothing about Gcode
I use slicer to process stl files to print i regularly print big ish stuff that takes 12 hours plus so it ends up printing over night

Is there a simple way to turn off the heating to the bed and both extruders once printing is complete

Thanks

João Ferreira
Posts: 69
Joined: 03 Aug 2017, 21:16

Re: Coding question turn of heaters

Post by João Ferreira » 31 Aug 2017, 21:36

Think you have to add some code to your end gcode, in the printers configuration tab..
I don't have it in my mind, but soon as i get home i copy paste it here from my slic3r

João Ferreira
Posts: 69
Joined: 03 Aug 2017, 21:16

Re: Coding question turn of heaters

Post by João Ferreira » 31 Aug 2017, 23:08

that´s how I have the code in slic3r prusa edition, both for extruder 1 and 2, and for dual extrusion setting.
Image
Image
Image

end G-code for printer 1 and printer 2 (extruder 1 and extruder 2):
M104 S0 ; turn off temperature
M140 S0
G28 X0 Y200 ; home X axis and push y to the front
M84 ; disable motors

end G-code for dual extrusion printer:
M104 S0 T0 ; turn off temperature
M104 S0 T1 ; turn off temperature on extruder 1
M140 S0
G28 X0 Y200 ; home X axis and push y to the front
M84 ; disable motors

RobinsBright2
Posts: 1
Joined: 06 Sep 2017, 08:22

Re: Coding question turn of heaters

Post by RobinsBright2 » 06 Sep 2017, 08:23

Space heaters also come in handy if you have a room in your home or office that lacks heating ductwork, is poorly insulated or is otherwise difficult to heat.

MrDoom
Posts: 223
Joined: 01 Apr 2017, 10:01

Re: Coding question turn of heaters

Post by MrDoom » 13 Sep 2017, 13:43

Yes what Robins said is correct, although too high of an ambient temperature can cause extrusion problems, especially with PLA.

Post Reply