Page 1 of 1

how to add B2X300 to printer in Ultimaker Cura 4.4

Posted: 27 Nov 2019, 11:26
by florbela
Hi all, I tried to add my B2X300 to Cura software but not being successful yet. I searched for tutorials or instructions but could not found. Can anyone help me please?
Thanks a lot.

Re: how to add B2X300 to printer in Ultimaker Cura 4.4

Posted: 27 Nov 2019, 12:16
by DomingosRodrigues
Hello,

You should follow the user manual for the B2X300 available here:
https://beeverycreative.com/manuals-tutorials/

It has all the steps required to add the printer to Cura. We don't have the printer integrated in Cura so we can keep upgrading the profiles regardless of Cura upgrades, which sometimes ruin compatibility and cause other issues.

I would recommend against using Cura 4.4 as it has been reported to have some bugs when slicing some STL files. I have been using 4.2.1 and know people who use 4.3 with no significant issues.

Best regards
Domingos Rodrigues

Re: how to add B2X300 to printer in Ultimaker Cura 4.4

Posted: 27 Nov 2019, 14:37
by florbela
Many thanks for the quick reply :)

I followed the instructions as per the user guide, the problem I then see is that when I click to open file, it automatically opens the bee model and the pop-up window asking if I wanted to open that as project doesn't pop up.
I am not the administrator of this laptop, do you think this can make a difference?
print_screen.png
print_screen.png (110.44 KiB) Viewed 828 times

Re: how to add B2X300 to printer in Ultimaker Cura 4.4

Posted: 28 Nov 2019, 12:32
by florbela
Problem solved.
Went back to the previous version of the software, 4.0.0.. I also had the printer added in this version and it looks likes it is working well so far.
Many thanks