Parts of 3D printer

Please post here all the messages that aren't suitable on the other forums
Ali jaber
Posts: 1
Joined: 08 Feb 2017, 08:47

Parts of 3D printer

Postby Ali jaber » 08 Feb 2017, 08:53

Hello,

I have downloaded the .step files of the 3D printers part from link :
https://github.com/beeverycreative/hell ... nted_parts

The problem that I couldn't open these files due to error of missing term, if you may send it on my email or upload as a cad files or full steping file.

regards;

Geoffrey Borny
Posts: 44
Joined: 22 Jul 2016, 10:02
Location: Belgium

Re: Parts of 3D printer

Postby Geoffrey Borny » 08 Feb 2017, 10:19

How did you download the files ?
I did this a couple of weeks ago and there was no problem.
What I did to download the file is the following:
1) Click on the download button on the site normaly there will open a new screen on your explore,
2) Right click in that screen ans select save as,
3) There will open a new screen on your computer to choose where you want to save the file. Go to the location where you want to save it,
4) Make sure the option all files on the bottom right of the screen is selected and save the file.
5) Normaly it is possible now to open the step file in you cad software.

Check it before saving there will only stand the .step extention. But when you save without the option all files selected there will stand .step.txt I think.

Hope this will solve your problem.

Kind regards

tgala
Posts: 31
Joined: 25 Aug 2015, 14:56

Re: Parts of 3D printer

Postby tgala » 09 Feb 2017, 12:54

Hi!
if you download the whole repository at once you probably won't have those issues. Get it here: https://github.com/beeverycreative/hell ... master.zip
(to get this link you need to be on the root of the repository, on the right-hand side there will be a green button saying "Clone or Download", there you'll get this link).
Hope it helps :)

johnson83
Posts: 2
Joined: 08 Jan 2018, 14:42

Re: Parts of 3D printer

Postby johnson83 » 08 Jan 2018, 14:45

tgala wrote:Hi!
if you download the whole repository at once you probably won't have those issues. Get it here: https://github.com/beeverycreative/hell ... master.zip
(to get this link you need to be on the root of the repository, on the right-hand side there will be a green button saying "Clone or Download", there you'll get this link).
Hope it helps :)


Thank you ^^


Return to “GENERAL”

Who is online

Users browsing this forum: No registered users and 2 guests