Search found 12 matches

by Frank33456
15 Aug 2018, 17:24
Forum: Auto-Calibration
Topic: Calibrating won't stop
Replies: 1
Views: 2204

Re: Calibrating won't stop

Hello,

please forget this post, i just hit the wrong connector on the board - now all works fine.

Mea culpa, mea maxima culpa :)


Best regards
Frank
by Frank33456
15 Aug 2018, 10:34
Forum: Auto-Calibration
Topic: Calibrating won't stop
Replies: 1
Views: 2204

Calibrating won't stop

Hello, finally i've managed to mount the auto-calibration addon to my hpb. If i start "Set nozzle height", the new nozzle moves to vertikal position, but it don't stop when he reaches the printerbed, he presses the printerbed down!. At this point, i switched power-off. Is this normal behaviour or wi...
by Frank33456
09 Oct 2017, 17:08
Forum: helloBEEprusa
Topic: LED of Y-Endstop constantly on with lower brightness
Replies: 2
Views: 3387

Re: LED of Y-Endstop constantly on with lower brightness

Hello Mr. Doom, yes, you are right. If i power on the printer, the led is always shining a little bit and the display has in the lowest line the text "helloBeePrusa ready". If then the switch is triggered, the led lights up as on the other switches and the display line changes to "Endstops Y". The F...
by Frank33456
08 Oct 2017, 18:29
Forum: helloBEEprusa
Topic: LED of Y-Endstop constantly on with lower brightness
Replies: 2
Views: 3387

LED of Y-Endstop constantly on with lower brightness

Hello, i have noticed that the LED of the Y-Endstop is constantly on at a lower brightness, even if the build plate has no contact. If the switch is hit by the plate, the led lights up as before and the switch works. In the display is the line "Endstops Y" shown. Has someone an idea what i can do? B...
by Frank33456
01 Oct 2017, 19:31
Forum: helloBEEprusa
Topic: [FIRMWARE] Latest helloBEEprusa firmware 1.1.1 Final
Replies: 14
Views: 20796

Re: [FIRMWARE] Latest helloBEEprusa firmware 1.1.1 Final

Hello, last Friday i've managed to update my HBP to the new Firmware. But now the function "Change Filament -> Load" won't stop the motor after i pressed the button on "press and hold to continue" (i think you mean the button since there is no hint what to press :) ). The only way to stop is to pres...
by Frank33456
04 Sep 2017, 17:09
Forum: helloBEEprusa
Topic: PSU Fan noisy
Replies: 3
Views: 3791

Re: PSU Fan noisy

Hello,

thanks for your answer.

The printer is in guarantee, so i will send a mail to customer service.


Best regards
Frank
by Frank33456
01 Sep 2017, 15:40
Forum: helloBEEprusa
Topic: PSU Fan noisy
Replies: 3
Views: 3791

PSU Fan noisy

Hello,

the fan of my psu from the HBP has began to make some noises like it's want some oil ;) . Are there any suggestions to repair this?


Best Regards
Frank
by Frank33456
11 Apr 2017, 12:08
Forum: helloBEEprusa
Topic: Bed temperature too low
Replies: 6
Views: 6430

Re: Bed temperature too low

Hello,

thanks for your answer.

Ok, next time i try to set the temp to 70° and see what happen. Currently i used blue tape, but maybe the adhesion problem can be solved with BuildTak.

Best regards
Frank
by Frank33456
11 Apr 2017, 10:59
Forum: helloBEEprusa
Topic: Bed temperature too low
Replies: 6
Views: 6430

Bed temperature too low

Hello, currently i try to print some larger objects with PLA and experience warping and adhesion problems. Print temp is set to 210° and bed temp is set to 65° (shown in display) So i check the temperatures of the bed per infrared while printing and get a temperature in the middle of the bed of 48° ...
by Frank33456
25 Nov 2016, 21:26
Forum: helloBEEprusa
Topic: Power Switch Connections
Replies: 3
Views: 4278

Re: Power Switch Connections

Hello,

thanks for your replies.

Yes, i figured it out. The images in the assembly manual were too small for my old eyes :D . With a multimeter i have found the correct connections.

Again, thanks

Best regards

Frank